Metallic Paint (Sapphire) for Walls & Interiors

Colors

Colors:

Actual metallic paint color may have differ from computer screen. Test product in small area before application.
Select from any of our standard colors below, or give us a call at (323) 308-2600 for custom color orders.

SM2505

SM3001

SM3000

SM3700

SM7005

SM7000

SM7007

SM4500

SM5509

SM5004

SM5003

SM5502

SM5500

SM3701

SM4000

SM2500

SM2503

SM4503

SM1001

SM1009

SM60031

SM6005

SM6000

SM2005

SM5000

SM1001

SM5503

SM5505

SM5501

SM8000

SM8003

SM8005

SM8006

SM2501

SM5800

SM4508

SM5005

SM3002

SM1008

Product Description

Description:

Meoded Sapphire Metallic is a unique Low VOC pearlescent paint that gives walls, metal, trim, furniture or any other paintable surface a rich, opulent look of shimmering satin. Whether in homes, offices, or commercial spaces, Sapphire Metallic will give surrounding areas an heir of sophistication fitting even for royalty. Meoded is the paint and plaster leader in color, texture, style, and innovation, and Sapphire Metallic was developed as the finishing touch for all decorating projects. Sapphire Metallic is an advanced water-based formula made with fine mica powders giving surfaces a beautiful pearl luster with less environmental impact.

Meoded Sapphire Metallic is supplied in colored bases from which custom colors can be created. It is recommended to use as dark a base as possible to achieve custom colors because over saturation with pigment can cause the paint to lose its metallic effect. Using a Zero VOC colorant will keep custom tinted Sapphire Metallic Low VOC.

Application

Surface Preparation:

All surfaces must be clean and free of dust, dirt, oils and grease. Make sure the surface is sound and free of loose and flaking paint. Priming the substrate is highly recommended, and do not paint over shiny, smooth surfaces, such as plastic or glossy oil-based paints, unless prepared with the right primer.

Application Methods:

Meoded Sapphire Metallic paints can be applied with a brush, roller, or HVLP sprayer. Use only high-quality tools with metallic effect paints. Work quickly in one direction, from joint to joint, keeping a wet edge while working. A strié effect may be created by applying with a brush in vertical or horizontal fashion. A roller may be used in a random pattern to create a unique finish as well. Other decorative painting tools and techniques may be used to create your desired results. It is important to note that a uniform finish is not achievable with Sapphire Metallic if rolled or brushed like standard acrylic paints. Spraying may require thinning with water; do not reduce more than 10%. Lightly spray each coat at a distance of 12-24” from surface with air pressure of 55-65psi. Do not apply too heavily in areas; pooling and dripping may occur. Regularly stir paint while working. Two or more coats are usually required to obtain the desired look. Apply only during temperate conditions: 50° to 90°F and between 25% and 75% relative humidity. Higher temperature and lower humidity may cause the paint to lose its wet edge.

Exterior Application:

It is recommended to protect Sapphire Metallic with Meoded Clear Satin or Clear Gloss for exterior applications. Two coats will usually provide adequate protection, while three coats are recommended for high traffic areas.

Coverage

Covers approx. 300 sq. ft. per gallon; 75 sq. ft. per quart. Sapphire Metallic is a semi-transparent material, so it is important to note that basecoat color can affect final color. Test a small area to make sure you receive desirable results.