Application

PREPARATION – All surfaces must be clean and free from wax, grease, oil, dirt, chalk, dust, mildew, etc., and not have any loose or peeling paint.

INTERIOR NEW SURFACES

Prime the substrate with a PVA primer and let it fully dry.

INTERIOR AND EXTERIOR EXISTING SURFACES

Any glossy surfaces must be lightly sanded, dusted, then primed with a water-based multi- purpose primer and let fully dry. Next, apply one coat of Quartz Primer, and let it fully dry.

Preparation of flat, non-glossy surfaces requires only the application of diluted Quartz Primer.

Surfaces that are absorbing or had previous plaster, it is recommended to dilute the primer with up to 25% water.

EXTERIOR BROWN COAT

The surface should first be pressure washed to clean. When the surface is fully dry, apply Quartz Primer diluted up to 25% in water. Let dry for a minimum of 3 to 5 hours. Over a brown coat, use three (3) thin coats of any Meoded plasters to achieve a smooth, uniform surface.

APPLICATION

The primer can be brushed, rolled, or spray applied. Apply only when the surface and air temperatures are between 50°F and 95°F. Do not apply under high humidity or if rain is expected within 24 hours. Use a universal primer first when going over oil-based paint.