Marmorino Intonaco - Texturing Plaster

Find your local Meoded Distributor
to purchase for a better price.

Marmorino Intonaco - Texturing Plaster

Find your local Meoded Distributor
to purchase for a better price.

Additional information

Weight N/A
Dimensions N/A
Size

Quart, Gallon, 4 Gallon

Meoded Colors

Natural White, Kasper, White Dove, Pure White, Designer White, Calm White, Creative White, Cumulous, Latte, Creamer, Origata, Mint, Bliss, Letter, Zen, Graystone, Clarity, Tip-Taupe, Villa, Light Coffee, Swiss Coffee, Sandstorm, Antique, Faye, Constellation, Dolce, Peach, Slate, Cafe, Mountain Fog, Stone, Strokes of Taupe, Overcast, Canvas, Recital, Solitude, Fossil, Walkway, Rocky, Tarnished Silver, Lounge, Concrete, Fairground, Balboa Gray, Shaded, Bound, Dusk, Structure, Damask, Dark Denim, Bayou, Deep Teal, Marlboro Blue, Pistachio, Sage, Morning Dew, Olive, Rose, Bellerina, Flow, Violet Essence, Presto, Sunny Day, Medalion, Deep Gold, Flowerpot, Pottery, Ombia, Canal, Ruby Red, Brickyard, Red Wine, Mauve Brown, Cocoa, Charcoal, Obsidian, Granite, Dark Knight, Deep Sea, M-Black

Product Description

Marmorino Intonaco is a genuine lime-based stone effect plaster, suitable for interior and exterior surfaces. Intonaco’s medium size grain forms a thicker body which allows the creation of heavy textures. A wide range of textures can be achieved with Intonaco including smooth with minimal movement, rough textures, natural stone looks, and fluted finishes.

Coverage

1KG Quart – covers approximately 3-7 sq ft for 2 coat application.
5KG Gallon – covers approximately 15-35 sq ft for 2 coat application.
20KG Bucket – covers approximately 60-140 sq ft for 2 coat application.

Coverage depends on surface porosity and texture.

Application

Preparation – Surface should be smooth, clean and dust free. It is recommended to apply over a level 4-5 wall.

 

New Surface – Surface should be smooth, clean and dust free. Prime the substrate with the recommended water based primer as required; such as a PVA primer for new drywall, multi-purpose primer for wood or glossy surfaces, and let it dry fully. Next apply one coat of Meoded Quartz Primer allowing it at least 3-5 hours to dry.

 

Existing Surface – Any surface with sheen should be sanded, dust free, and then primed with a water based multi-purpose primer letting it dry fully. Next apply one coat of Quartz Primer allowing it at least 3-5 hours to dry. Preparation of flat surfaces require only the application of Quartz Primer.

 

Exterior Brown Coat – First, the surface should be pressure washed and cleaned. When the surface is fully dry, apply Quartz Primer diluted with up to 25% water. Let it dry for at least 3-5 hours. Over the brown coat, it is recommended to apply three thin coats of Intonaco to get a smooth surface.

 

Application – Use a stainless steel rounded edge trowel or spatula to apply two coats of Intonaco. If applying light colors, it is recommended to use Meoded’s Whiteout Trowel to avoid formation of dark trowel marks.

 

First Coat – Intonaco should be applied thinly and evenly, covering the entire wall. it is recommended to use a damp sponge in a circular motion before Intonaco dries to create a more uniform design, expose the aggregate, and eliminate all imperfections. Allow at least 12 hours for the first coat to dry.

 

Second Coat (Smooth Finish) – Apply the second coat in the same manner as the first coat, but this time apply it a bit thicker. Spread the material evenly maintaining the same thickness across the wall. For a smooth finish, smooth the wall with the trowel applying minimal pressure and cleaning off all excess material. Then, let the plaster dry for a minimum of 12 hours. Next, smooth the wall by sanding the surface with 150 grit sandpaper and following with 300+ grit.

 

Second Coat (Heavy Textures) – Intonaco’s medium size grain allows for the creation of heavy textures such as flutes and distressed finishes. It is recommended to build heavy textures by applying multiple thin coats rather than thick coats to avoid cracking.

 

Sealer – After a minimum of 48 hours of dry time, it is recommended to protect the finish with Stain Shield natural look sealer to provide the finish with protection from moisture and dirt, while not adding sheen or changing the color.

 

Veleature Glaze (Color Wash) – Veletaure is a concentrated glaze that is made to penetrate into plasters giving it a multi-color effect. Always remember that plaster absorbs quickly and that you can always darken the color if needed. Dilute the first coat of Velature with at least 800%-1,000% water (1 part glaze to 8-10 parts water). Using a sponge, “wash” the wall with a light thin layer, letting the wall to “soak” the glaze, and seal up the plaster so that you can work with a second, darker, coat.

Data Sheets

Dealer Information

Check out our Dealer Directory  to view your nearest distributor.

Save 10% on your order and a shipping fee by going to your nearest dealer.

&nbs”;

Shipping Information

Orders typically ship in 1-2 business days. Shipping charges and transit times vary depending on your zip code and order weight.

Click here to view our Marmorino Intonaco Gallery.

Complimentary Products

Stain Shield QuartMeoded Italian Venetian Plaster Rubber and Plastic Handle Medium Trowel 240x100 mmMeoded Whiteout Medium Trowel 240x100x0.6mm

 

Dealer Directory

To purchase for a lower price, enter your zip code to search for your nearest store/dealer: